Chapter 3
I/O Information
3-10
ni.com
Trigger
The TRG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-8 shows the TRG connector location on the NI PXI-8186.
Table 3-8 lists and describes the trigger connector signals.
Figure 3-8.
TRG Connector Location and Pinout
Table 3-8.
TRG Connector Signals
Pin
Signal Name
Signal Description
1
TRIG
Trigger
2 (Shield)
GND
Ground
1
2
NI PXI-8186
Embedded Controller
