background image

GETTING STARTED GUIDE

NI PXI-5670

2.7 GHz RF Vector Signal Generator

Note

 

Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI PXI-5670 (NI 5670). The
NI 5670 is a modular 2.7 GHz RF vector signal generator (VSG). The NI 5670 ships with the
NI-RFSG instrument driver, which you use to program the device.

The NI 5670 comprises the following devices:

NI PXI-5610 (NI 5610) RF upconverter module

NI PXI-5421 (NI 5421) arbitrary waveform generator (AWG) module

To access NI 5670 documentation, navigate to 

Start

»

All Programs

»

National Instruments

»

NI-RFSG

»

Documentation

.

The specifications document for your device is installed with the driver software. Refer to 

ni.com/manuals

 for the most recent specifications for your device.

Caution

 

The protection provided by this product may be impaired if it is used in a

manner not described in this document.

Hot Surface

 

If the NI 5670 has been in use, it may exceed safe handling

temperatures and cause burns. Allow the NI 5670 to cool before removing it from
the chassis.

Contents

Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2

Verifying the Kit Contents................................................................................................ 4

Preparing the Environment....................................................................................................... 5
Installing the Software.............................................................................................................. 6
Installing the NI 5670............................................................................................................... 6

Interconnecting the NI 5670 Modules.............................................................................. 8

Configuring the NI 5670 in MAX...........................................................................................15

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for PXI-5670



























Reviews: