©
National Instruments Corporation
I-1
Index
Numbers
8-bit ADC and LUT, 3-2
A
acquisition and region-of-interest control, 3-3
acquisition modes, 3-7
acquisition window
controlling, 3-5 to 3-6
programming video parameters, 3-6 to 3-7
active line region, 3-5
active pixel region, 3-5
A/D conversion specifications, A-1
ADC, 8-bit, 3-2
aspect ratio. See pixel aspect ratio.
B
BNC connectors
pin assignments (figure), 4-1
signal connections, 4-2
board configuration. See configuration.
C
cables
optional equipment, 2-2
required cable, 2-1
CompactPCI specifications, 1-2
composite synchronization. See CSYNC.
configuration. See also installation.
setting up IMAQ system, 2-2 to 2-3
CSYNC
acquisition window control, 3-5
CSYNC mux, 3-3
external acquisition mode, 3-7
CSYNC signal (table), 4-2
D
delayed video acquisition, 3-5
DMA controllers, 3-3
E
environment specifications, A-3 to A-4
equipment, optional, 2-2
external connection specifications, A-2
F
field, for interlaced video signal, 3-6
FIFO buffer, 3-3
formats supported, A-1
frame
definition, 3-6
frame/field selection, 3-5
functional overview, 3-1 to 3-4
G
gain and offset circuitry, 3-2
genlock synchronization generator, 3-3
H
hardware overview, 3-1 to 3-7
8-bit ADC and LUT, 3-2
acquisition and region-of-interest
control, 3-3
acquisition modes, 3-7
block diagram, 3-2
CSYNC mux, 3-3
FIFO buffer, 3-3
functional overview, 3-1 to 3-4
gain and offset circuitry, 3-2
