![background image](http://html1.mh-extra.com/html/national-instruments/pxi-1407/pxi-1407_user-manual_3596805038.webp)
Glossary
G-4
www.ni.com
DAQ
Data acquisition. (1) Collecting and measuring electrical signals from
sensors, transducers, and test probes or fixtures and inputting them to a
computer for processing. (2) Collecting and measuring the same kinds of
electrical signals with A/D or DIO boards plugged into a computer, and
possibly generating control signals with D/A and/or DIO boards in the
same computer.
dB
Decibel. The unit for expressing a logarithmic measure of the ratio of
two signal levels: dB = 20log
10
V1/V2, for signals in volts.
DC
Direct current.
default setting
A default parameter value recorded in the driver; in many cases, the default
input of a control is a certain value (often 0) that means use the current
default setting.
DLL
Dynamic link library. A software module in Microsoft Windows containing
executable code and data that can be called or used by Windows
applications or other DLLs; functions and data in a DLL are loaded and
linked at run time when they are referenced by a Windows application or
other DLLs.
DMA
Direct memory access. A method by which data can be transferred to and
from computer memory from and to a device or memory on the bus while
the processor does something else; DMA is the fastest method of
transferring data to/from computer memory.
DRAM
Dynamic RAM.
drivers
Software that controls a specific hardware device, such as an image
acquisition board.
dynamic range
The ratio of the largest signal level a circuit can handle to the smallest
signal level it can handle (usually taken to be the noise level), normally
expressed in decibels.
E
EEPROM
Electrically erasable programmable read-only memory. ROM that can be
erased with an electrical signal and reprogrammed.
external trigger
A voltage pulse from an external source that triggers an event such as
A/D conversion.