background image

©

 National Instruments Corporation

1-1

NI PXI-1036/PXI-1036DC User Manual

1

Getting Started

This chapter describes the key features of the NI PXI-1036 and 
PXI-1036DC chassis, and lists the kit contents and optional equipment 
you can order from National Instruments.

Unpacking

Carefully inspect the shipping container and the chassis for damage. Check 
for visible damage to the metal work. Check to make sure all handles, 
hardware, and switches are undamaged. Inspect the inner chassis for any 
possible damage, debris, or detached components. If damage appears to 
have been caused during shipment, file a claim with the carrier. Retain the 
packing material for possible inspection and/or reshipment.

What You Need to Get Started

NI PXI-1036 or NI PXI-1036DC chassis

Filler panels

Power cable, either:

AC power cable—refer to Table 1-1 for AC power cables

DC power cable (PXI-1036DC only)

NI PXI-1036/PXI-1036DC User Manual

Read Me First: Safety and Electromagnetic Compatibility

Driver CD-ROM containing NI PXI chassis software

Chassis number labels

Summary of Contents for PXI-1036DC































































Reviews: