![background image](http://html1.mh-extra.com/html/magma/p13rr-ras/p13rr-ras_quick-installation-manual_3530990001.webp)
(2 locations)
Quick Installation Guide
Magma
P13RR-RAS
© 2007 Mission Technology Group, Incorporated, DBA Magma
This publication is protected by Federal Copyright Law, with all rights reserved. No part of this publication may be copied, photocopied,
reproduced, stored in a retrieval system, translated, transmitted or transcribed, in any form or by any means manual, electric, electronic,
electro-magnetic, mechanical, optical or otherwise, in whole or in part without prior written consent from Mission Technology Group, Inc..
Limitation of Liability
Information presented by Magma in this manual is believed to be accurate and reliable. However, Magma assumes no responsibility for its use.
No license is granted by implication or otherwise to any rights of Magma.
Trademark References
Trademarks and registered trademarks are proprietary to their respective manufacturers.
Product specifications and prices are subject to change without notice.
09-09977-00-A
1
Magma
9918 Via Pasar, San Diego, CA 92126, USA
Phone (800) 285-8990 US, (858) 530-2511 • Fax (858) 530-2733
www.magma.com
Package Contents
IMPORTANT
Important safety information and other information on how to use Magma P13RR-RAS are provided in the User
Guide. This manual is available online for a download at www.magma.com/support/manuals.
1
2
3
4
(
1
) Magma P13RR-RAS chassis
(
1
) MAgma PCI Expansion Cable
(
1
) Magma PCI Host Card
(
2
) Power Cords
!
1
Install PCI Host card and connect cables
Install the Magma PCI Host Card into an available PCI slot in your computer.
2
Open Enclosure
Remove the 2 thumbscrews that retain the top cover of the expansion chassis.
Slide the cover
backwards and upwards.
3
Install PCI cards
Remove PCI filler bracket for the expansion slot you wish to use in the
chassis. Install peripheral PCI card into the slot connector and secure with
retaining screw.
Repeat the process for all other PCI peripherals you wish to install in the chassis.
Secure it with retaining screw.
Connect one side of the PCI expansion cable to the host card.
4
Connect the other side of the
PCI expansion cable to the
back of the P 1 3 R R - R A S
chassis. Ensure that the
system‘s redundant Power
Supply Units are switched
off and connect the chassis
power cords.
HOST COMPUTER
HOST COMPUTER
PCIConnector
P13RR-RAS
PCI Connector
Power on P13RR-RAS
E a c h o f t h e r e d u n d a n t p o w e r s u p p l i e s h a s i t s o w n p o w e r s w i t c h a n d l e d .
Tu r n o n e a c h o f t h e i n d i v i d u a l p o w e r s w i t c h e s o n t h e r e a r o f t h e c h a s -
s i s , ve r i f y t h a t t h e g re e n L E D a b o ve t h e p o we r s w i t c h i s o n , t h e n p u s h t h e
m a i n p o w e r b u t t o n o n t h e f r o n t o f t h e c h a s s i s .
IMPORTANT:
Yo u m u s t a p p l y p o w e r t o t h e P 1 3 R R - R A S e x p a n s i o n c h a s -
s i s b e f o r e y o u p o w e r u p t h e h o s t c o m p u t e r.
!