Chapter 2
Installation, Configuration, and Operation
©
National Instruments Corporation
2-3
Using Handle/Tilt Stand for Bench-Top Application
Press the handle release buttons on each side of the chassis to release the
handle. You can then rotate the handle shown in Figure 2-2 to a variety of
positions. When the handle is at the desired position, release the buttons.
Make sure it locks into position.
Figure 2-2.
Using the Handle for Bench-Top Applications
Fold-Down Keyboard
The removable fold-down keyboard is shown in Figure 1-1,
. The fold-down keyboard incorporates
a pointing device and left and right mouse buttons.
To close the keyboard, grasp the coiled keyboard cable and pull it away
from the LCD screen as you begin closing the keyboard. Keep pulling
the cable higher while continuing to close the keyboard. Then release
the cable just as the keyboard snaps into place.
To remove the keyboard, unplug the coiled cable from the chassis,
press the button on both sides of the keyboard, and remove it.
1
Handle Release Button
1
