Maintenance
To clean filters, remove five screws, two
rubber feet, and panel as shown. Remove
filter and clean by washing it in a mild soap
solution and rinse. Allow to dry before
reinstalling filter, panel, feet, and screws.
Dimensions and Mounting Holes
Below are the PXI-1002 dimensions and mounting holes for the optional rack
mount kit (available from National Instruments).
Note: To facilitate power supply and module cooling, place the PXI-1002 on a
bench top or instrument rack so that other equipment is kept a minimum of
3.0 in. (76.2 mm) from air inlets and outlets.
Filter
6.97 in.
7.50 in.
0.96 in.
6.46 in.
8.38 in.
3.02 in.
0.22 in.
2.68 in.
1.83 in.
2.57 in.
3.13 in.
1.92 in.
10.12 in.
8X M4, .25 Max
both sides of
chassis for
mounting purposes
Three
controller
expansion
slots
System
slot
Three
peripheral
slots