background image

GETTING STARTED GUIDE

PCIe-5775

12-Bit, 6.4 GS/s, 2-Channel PCI FlexRIO Digitizer Device

This document explains how to install, configure, test, and use the PCIe-5775. You can
program the PCIe-5775 with the following software options.

FlexRIO driver software

NI LabVIEW Instrument Design Libraries for FlexRIO (instrument design libraries)

Note

 

Adapter modules are not installable or interchangeable on the PCIe-5775.

Contents

FlexRIO Documentation and Resources...................................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 3
PCIe-5775 Kit Contents............................................................................................................ 3
Preparing the Environment....................................................................................................... 3
Installing the Software and Driver............................................................................................ 4
Installing the PCIe-5775........................................................................................................... 4
PCIe-5775 Front Panel and Pinout............................................................................................5
Configuring the PCIe-5775 in MAX........................................................................................ 8
FlexRIO Examples....................................................................................................................8

Accessing FlexRIO Examples.......................................................................................... 9

Block Diagram.......................................................................................................................... 9
Component-Level Intellectual Property (CLIP)......................................................................11
Making a Measurement with LabVIEW................................................................................. 11
Synchronization.......................................................................................................................11

Sharing Signals and Triggers with Another PCI Express FlexRIO Device....................12
Sharing Signals and Triggers with PCI Express Devices Using RTSI........................... 12

Troubleshooting...................................................................................................................... 13

What Should I Do if the PCIe-5775 Doesn't Appear in MAX?......................................13
What Should I Do if the PCIe-5775 Fails the Self-Test?................................................ 13

Where to Go Next................................................................................................................... 14
Worldwide Support and Services............................................................................................ 14

Summary of Contents for PCIe-5775
















Reviews: