background image

GETTING STARTED GUIDE

PCIe-5763

16-Bit, 500 MS/s, 4-Channel PCI FlexRIO Digitizer Device

This document explains how to install, configure, test, and use the PCIe-5763. You can
program the PCIe-5763 with the following software options.

FlexRIO driver software

NI LabVIEW Instrument Design Libraries for FlexRIO (instrument design libraries)

Note

 

Adapter modules are not installable or interchangeable on the PCIe-5763.

Contents

FlexRIO Documentation and Resources...................................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 3
PCIe-5763 Kit Contents............................................................................................................ 3
Preparing the Environment....................................................................................................... 3
Installing the Software and Driver............................................................................................ 4
Installing the PCIe-5763........................................................................................................... 4
PCIe-5763 Front Panel..............................................................................................................5
Configuring the PCIe-5763 in MAX........................................................................................ 8
FlexRIO Examples....................................................................................................................8

Accessing FlexRIO Examples.......................................................................................... 8

Block Diagram.......................................................................................................................... 8
Component-Level Intellectual Property (CLIP)......................................................................11
Making a Measurement with LabVIEW................................................................................. 11
Synchronization...................................................................................................................... 12

Sharing Signals and Triggers with Another PCI Express FlexRIO Device....................13
Sharing Signals and Triggers with PCI Express Devices Using RTSI........................... 13

Troubleshooting...................................................................................................................... 13

What Should I Do if the PCIe-5763 Doesn't Appear in MAX?......................................13
What Should I Do if the PCIe-5763 Fails the Self-Test?................................................ 14

Where to Go Next................................................................................................................... 14
Worldwide Support and Services............................................................................................ 15

Summary of Contents for PCIe-5763

















Reviews: