![background image](http://html.mh-extra.com/html/national-instruments/pcie-1477/pcie-1477_getting-started-manual_710027007.webp)
Verifying the Installation
After you have installed the device and powered on your computer, Windows will recognize
the device and assign resources to it. You can verify that the system recognizes the NI
PCIe-1477 by using Measurement & Automation Explorer (MAX).
1.
Launch MAX by navigating to
Start
»
All Programs
»
National Instruments
»
MAX
or by
clicking the MAX desktop icon.
2.
Expand
Devices and Interfaces
.
3.
Verify that the NI PCIe-1477 device appears under
Devices and Interfaces
.
If the device does not appear, press <F5> to refresh the view in MAX. If the device does
not appear after refreshing the view, visit
ni.com/support
for troubleshooting information.
Connectors and Interfaces
Figure 3. Front Panel Interface
3
2
1
4
1. Digital I/O Connector
2. Base Camera Link SDR Connector
3. Medium/Full/Extended Camera Link SDR
Connector
4. Power over Camera Link LEDs
NI PCIe-1477 Getting Started Guide
|
© National Instruments
|
7