![background image](http://html1.mh-extra.com/html/national-instruments/pci-8361/pci-8361_user-manual_3646934109.webp)
© National Instruments Corporation
|
C-3
MXI-Express x1 Series User Manual
Can I use MXI-Express x1 products in place of MXI-4?
Yes. There are products that offer the same PCI slot-to-PXI chassis connectivity as MXI-4 with
a few differences, as shown in Table C-1.
Table C-1.
Feature Comparison Between MXI-4 and Comparable MXI-Express x1
Products
Features
MXI-4 Copper
(PCI/PXI-8331)
MXI-Express x1 Copper
(PCI/PXI-8360, PXI-8364)
Maximum Cable Length
10 m
7 m
PXI Modules Interchangeable
Between PXI Controller or
Peripheral Slots
Yes
No
*
PXI Hybrid Slot Compatibility
†
No
Yes
PCI Slot Voltage Compatibility
Universal
Universal
PXI Slot Voltage Compatibility
5 V
‡
Universal
Sustained Throughput (MB/s)
Up to 78
**
Up to 100
**
Cable Connector Type
4-pin serial D-Sub
18-pin PCI Express x1
D-Sub
LEDs for Power/Link
2/2
1/2/1
LEDs for Activity
2/2
0/0/0
PCI Express Slot to
PXI Link Capability
***
No
Yes
ExpressCard Slot to
PXI Link Capability
***
No
Yes
Low-Profile Height for PCI Board
No
Yes
*
Unlike MXI-4, the MXI-Express-based PXI controller modules are different from the PXI peripheral
modules used to daisy-chain to subsequent chassis.
†
With hybrid slot support, you can connect an expansion chassis to a PXI Express chassis that contains
PXI hybrid slots.
**
Actual throughput performance varies depending on the system setup and composition.
‡
Universal options for copper and fiber-optic MXI-4 products are available upon request.
***
With the copper MXI-Express PXI modules, you can control a PXI chassis from a PCI Express or
ExpressCard slot in your host computer using the PCIe-8361, PCIe-8362, PCIe-8363, or
ExpressCard-8360.