2-8
|
ni.com
Chapter 2
DAQ System Overview
For more information on the connectors used for DAQ devices, refer to the
NI DAQ Device
Custom Cables, Replacement Connectors, and Screws
document by going to
and entering the Info Code
rdspmb
.
USB Device Accessories, USB Cable, and Power Supply
USB Screw Terminal and USB Mass Termination devices feature connectivity directly on the
device and do not require an accessory for interfacing to signals. However, NI offers a variety
of products to use with the USB M Series devices, as shown in Table 2-2.
37-Pin M Series Cables and Accessories
This section describes some cable and accessory options for the PCI-6221 (37-pin) device. Refer
to the following sections for descriptions of these cables and accessories. Refer to
for
other accessory options.
Table 2-2.
USB Device Cabling, Accessories, and Power Supply
Description
Part Number
NI USB DAQ Power Supply
780046-01
Externally Powered USB M Series Panel
Mounting Kit
*
780214-01
USB cable with locking screw, 2 m
780534-01
BNC Male (Plug) to BNC Male (Plug) Cable
779697-02
* Not for use with NI USB BNC devices.
Table 2-3.
PCI-6221 (37-Pin) Cables and Accessories
Cables and Accessories Type
Supported Models for
PCI-6221 (37-Pin) Device
Cables
Shielded
SH37F-37M
SH37F-P-4
Unshielded
R37F-37M
Accessories
Unshielded Screw Terminal Block
CB-37F-HVD
CB-37FV
CB-37FH
CB-37F-LP
Custom Connectivity
TB-37F-37SC
TB-37F-37CP
Summary of Contents for PCI-6281
Page 1: ...PCI 6281...
