Figure 3. Module Installation
2
3
NI PXIe-1075
1
1. Chassis
2. Hardware Module
3. Ejector Handle in Downward (Unlatched) Position
9.
Latch the module in place by pulling up on the ejector handle.
10. Secure the module front panel to the chassis using the front-panel mounting screws.
Note
Tightening the top and bottom mounting screws increases mechanical
stability and also electrically connects the front panel to the chassis, which can
improve the signal quality and electromagnetic performance.
11. Cover all empty slots using EMC filler panels or fill using slot blockers to maximize
cooling air flow, depending on your application.
12. Power on the chassis.
Note
For more information about maximizing cooling air flow, refer to the
Maintain Forced-Air Cooling Note to Users
included in your kit.
Related Information
Why Is the ACCESS LED Off When the Chassis Is On?
on page 13
Installing the PCI-5153
1.
Power off and unplug the computer.
2.
Access the computer system expansion slots. This step might require you to remove one
or more access panels on the computer case.
3.
Locate a compatible slot and remove the corresponding slot cover on the computer back
panel. PCI-5153 modules can only be inserted into PCI slots.
Tip
To maximize airflow and extend the life of the PCI device, leave any
adjacent PCI slots empty.
6
|
ni.com
|
PXI/PCI-5153 Getting Started Guide
