manualshive.com logo in svg

National Instruments PC-DIO-96/PnP, User Manual

The National Instruments PC-DIO-96/PnP is a versatile device offering superior digital input/output capabilities. Its user manual provides step-by-step instructions, ensuring seamless integration and usage. Visit our manualshive.com to access the manual, download it for free, and uncover the full potential of this exceptional product.

Share
Download
background image

PC-DIO-96/PnP Hardware and Software
Configuration Form

Record the settings and revisions of your hardware and software on the line to the right of each 
item.  Also fill out the hardware and software configuration forms for all modules in the chassis, 
all relevant DAQ boards, and all other chassis in the application.  By completing these forms 
accurately, our applications engineers will be able to answer your questions efficiently.

National Instruments Products

DAQ hardware  _______________________________________________________________

Interrupt level of hardware ______________________________________________________

Base I/O address of hardware ____________________________________________________

Programming choice ___________________________________________________________

NI-DAQ, LabVIEW, or LabWindows/CVI version ___________________________________

Other boards in system  _________________________________________________________

Base I/O address of other boards  _________________________________________________

DMA channels of other boards  __________________________________________________

Interrupt level of other boards  ___________________________________________________

Other Products

Computer make and model ______________________________________________________

Microprocessor _______________________________________________________________

Clock frequency or speed _______________________________________________________

Type of video board installed ____________________________________________________

Operating system version  _______________________________________________________

Operating system mode  ________________________________________________________

Programming language _________________________________________________________

Programming language version  __________________________________________________

Other boards in system  _________________________________________________________

Base I/O address of other boards  _________________________________________________

DMA channels of other boards  __________________________________________________

Interrupt level of other boards  ___________________________________________________

Summary of Contents for PC-DIO-96/PnP









































































































































Reviews:

No comments

Related manuals for PC-DIO-96/PnP

JeaTone A Series Operation Instruction Manual preview
A Series
Brand: JeaTone Pages: 6
Measurement Computing CIO-DAS1401/12 User Manual preview
CIO-DAS1401/12
Brand: Measurement Computing Pages: 32
Viking K-1900-8 Product Manual preview
K-1900-8
Brand: Viking Pages: 4
Grundfos IO 351 Installation And Operating Instructions Manual preview
IO 351
Brand: Grundfos Pages: 27
Commax CDV-43M User Manual preview
CDV-43M
Brand: Commax Pages: 14
Commax DP-ML User Manual preview
DP-ML
Brand: Commax Pages: 10
Hall Research Technologies VSA-51 User Manual preview
VSA-51
Brand: Hall Research Technologies Pages: 47
golmar Soul S5110/ART 7W Instruction Manual preview
Soul S5110/ART 7W
Brand: golmar Pages: 40
Comelit Planux ViP 6202 User Manual preview
Planux ViP 6202
Brand: Comelit Pages: 58
2VV AirGENIO Installation, Operation And Maintenance Manual preview
AirGENIO
Brand: 2VV Pages: 19
2VV AirGENIO Operation And Use preview
AirGENIO
Brand: 2VV Pages: 24
inveo RFID-USB-DESK Reader User Manual preview
RFID-USB-DESK Reader
Brand: inveo Pages: 11
Huntleigh Tx 150 User Manual preview
Tx 150
Brand: Huntleigh Pages: 32
ACO FAM-PV Series User Instruction preview
FAM-PV Series
Brand: ACO Pages: 4
Dormakaba SVP-S 4 DCW Series Mounting Instructions preview
SVP-S 4 DCW Series
Brand: Dormakaba Pages: 5
Mohawk IA User Manual preview
IA
Brand: Mohawk Pages: 79
Sony CMT-BX1 Marketing Specifications preview
CMT-BX1 Marketing
Brand: Sony Pages: 2
RCA RS22163CP User Manual preview
RS22163CP
Brand: RCA Pages: 20

Brands by name

Popular brands

Load more brands