3
Install hardware*.
Key
1 PC/104-GPIB
2 GPIB Connection
3 GPIB Ribbon Cable
4 Screw
5 Stand Off
6 Parent Module
7 PC/104 Connector
8 PC/104 Header
* For Help
installing your hardware,
refer to the GPIB Hardware Guide
(available on the CD through View
Documentation).
A. Verify that you have the correct PC/104-GPIB stackthrough version: 16-bit modules have two PC/104
connectors; 8-bit modules have one PC/104 connector.
B. Mount the provided standoffs to the parent module. The parent module has either two or four mounting
holes for standoffs.
C. Plug the PC/104-GPIB into the parent module. Ensure proper contact by gently pressing the
PC/104-GPIB connector and PC/104 header together.
D. Use the provided screws to fasten
the PC/104-GPIB to the standoffs.
E. Plug in the GPIB ribbon cable.
