©
National Instruments Corporation
23
NI WLS/ENET-9163 Carrier User Guide and Specifications
Specifications
These specifications are typical at 25 °C unless otherwise noted.
For C Series I/O module specifications, refer to the documentation
included with the modules.
Note
These specifications are for the NI WLS/ENET-9163 carrier only, unless otherwise
noted.
Analog Input
Input FIFO size ...................................... 4095 samples >16 bit
8191 samples
≤
16 bit
Sample rate
1
NI WLS/ENET-9163 carrier........... 5 MS/s (multi-channel,
aggregate), maximum
With NI WLS/ENET-9215 ............. 100 kS/s, maximum
Timing accuracy
2
................................... 50 ppm of sample rate
Timing resolution
2
................................. 50 ns
Number of channels supported .............. Determined by the C Series
I/O module
Digital Triggers
Static Characteristics
Number of terminals .............................. 2 bi-directional, individually
settable
Pull-down resistor .................................. 49.9 k
Ω
±0.5%
Input voltage protection
3
........................ ±20 V on each pin
Power–on state ....................................... Input
Required minimum input pulse width.... 100 ns
1
Performance dependent on type of installed C Series I/O modules and number of channels in the task.
2
Does not include group delay. Refer to C Series I/O module documentation for more information.
3
Stresses beyond those listed under
Input voltage protection
may cause permanent damage to the device.
