INSTALLATION INSTRUCTIONS
NI SCXI -1336
Terminal Block for the NI SCXI-1129
This guide describes how to install and connect signals to the
National Instruments SCXI-1336 terminal block to configure the
SCXI-1129 switch module as a 16
×
16 matrix.
Screw terminals on the SCXI-1336 allow you to access the 16
×
16 matrix.
The SCXI-1336 also contains connections for scanner advanced output and
external input trigger signals and has two 128-pin DIN connectors for
connecting columns between modules.
Refer to the
NI Switches Getting Started Guide
to determine when to install
the terminal block. Visit
ni.com/switches
for information on other
switching solutions.
Conventions
The following conventions are used in this guide:
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash. When this symbol is marked on a
product, refer to the
Read Me First: Safety and Radio-Frequency
Interference
document for information about precautions to take.
™
̭͈Ρ΅νιϋΠ͉ͅȂུࢊβȜΐ͜܄̞̳ͦ̀͘͘ȃ