![background image](http://html1.mh-extra.com/html/national-instruments/ni-pxie-5663/ni-pxie-5663_getting-started-manual_3413101005.webp)
Other Equipment
There are several required items not included in your device kit that you need to install or
operate the NI 5663.
Required Items
•
A PXI/PXI Express chassis and chassis documentation. The NI PXIe-1075 chassis is one
available option for your device. For more information about compatible chassis options,
refer to
•
A PXI/PXI Express embedded controller or MXI controller system that meets the system
requirements specified in this guide and chassis documentation.
Optional Items
•
A 1 N · m standard SMA torque wrench (NI part number 780487-01).
Preparing the Environment
Ensure that the environment you are using the NI 5663 in meets the following specifications.
............................................................................
Operating ambient temperature
(IEC-60068-2-1, IEC-60068-2-2)
0 °C to 55 °C
............................................................................
Operating relative humidity
(IEC-60068-2-56)
10% to 90%, noncondensing
............................................................................
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient
temperature)
............................................................................
Pollution Degree
2
Indoor use only.
Caution
Clean the hardware with a soft, nonmetallic brush. Make sure that the
hardware is completely dry and free from contaminants before returning it to
service.
Note
Refer to the
NI PXIe-5663 Specifications
at
specifications.
Installing the Software
You must be an Administrator to install NI software on your computer.
1. Install an ADE, such as LabVIEW or LabWindows
™
/CVI
™
.
2. Insert the driver software media into your computer. The installer should open
automatically.
4
|
ni.com
|
NI PXIe-5663 Getting Started Guide
Summary of Contents for NI PXIe-5663
Page 1: ...PXIe 5663...