Caution
Apply external signals only while the NI 5644R is powered on. Applying
external signals while the device is powered off may cause damage.
Table 3.
Device Front Panel Icon Definitions
Refer to the user documentation for required maintenance measures to ensure user
safety and/or preserve the specified EMC performance.
The signal pins of this product's input/output ports can be damaged if subjected to
ESD. To prevent damage, turn off power to the product before connecting cables and
employ industry-standard ESD prevention measures during installation, maintenance,
and operation.
Table 4.
NI 5644R General Front Panel Connectors
Connector
Use
REF IN
Input terminal that allows for the use of an external 10 MHz Reference
Clock.
REF OUT
Output terminal that can export a 10 MHz Reference Clock or the 120 MHz
Sample Clock.
PFI 0
Programmable-function digital I/O (DIO) connector for use with triggers or
events.
DIGITAL I/O DIO terminal that contains general-purpose 3.3 V LVTTL DIO signals. DIO
lines are direction-configurable as input or output.
Table 5.
NI 5644R RF Front Panel Connectors
Connector
Use
RF IN 0
RF IN
Input terminal for RF signals.
CAL IN
Caution
Do not disconnect the cable that connects
CAL IN to CAL OUT. Removing the cable from or
tampering with the CAL IN or CAL OUT front panel
connectors voids the product calibration and
specifications are no longer warranted.
Terminal that is used when running self-calibration on the device.
LO OUT Output terminal for exporting the RF IN 0 LO source.
LO IN
Input terminal that allows the use of an external LO for RF IN 0.
12
|
ni.com
|
NI PXIe-5644R Getting Started Guide
Summary of Contents for NI PXIe-5644R
Page 1: ...PXIe 5644...
