©
National Instruments
11
8-Slot NI PXIe-1082 Backplane Installation Guide
Dimensions
Figure 8.
Dimensions
Cooling
Note
National Instruments is not responsible for damage to the backplane if inadequate
cooling is used.
Airflow should be from the bottom to the top of the PXI modules. You must
determine the airflow requirements for your system based on the
PXI
Hardware Specification
.
The backplane must be adequately cooled to function reliably. Ensure that
the components shown in Figure 9 are kept below their maximum case
temperatures throughout the operating range.
0.89 in.
(22.61 mm)
0.125 in.
(3.18 mm)
5.933 in.
(150.70 mm)
0.122 in.
(3.10 mm)
0.375 in.
(9.53 mm)
0.800 in.
(20.32 mm)
9.843 in.
(250 mm)
0.824 in.
(20.92 mm)
