National Instruments NI PCIe-8255R Page 44 User Manual Download

Page: 44 / 45

Index

NI PCIe-8255R User Manual

I-2

ni.com

National Instruments support and

services, A-1

NI 1427

software programming choices

NI Vision Builder for Automated

Inspection, 1-2

NI Vision Development Module, 1-2

NI 8255R

acquisition window control, 1-5
ATX connector, 3-2
cabling, 3-8
connection considerations, 2-13
connectors, 3-2
digital I/O overview, 2-1
general-purpose I/O, 2-10
I/O for fault conditions, 2-11
I/O for normal operation, 2-5
I/O terminal block, 3-8
IEEE 1394 camera cables, 3-8
isolated inputs, 2-3
isolated outputs, 2-3
LabVIEW FPGA Module, 2-1
NI Vision Terminal Block and

Prototyping Accessory, 3-8

power requirements, 3-9
product selection port, 2-9
quadrature encoder, 2-8
reconfigurable I/O, 2-1
signal connections, 3-1
start conditions, 1-4
trigger change detectors, 2-8
trigger inputs, 2-5
TTL inputs, 2-2
TTL outputs, 2-2

NI support and services, A-1
NI Vision Assistant, 1-2
NI Vision Terminal Block and Prototyping

Accessory, 3-8

power connection terminals, 3-9
power requirements, 3-9
product selection port, 2-9
programming examples (NI resources), A-1
protecting inductive loads, 2-15

quadrature encoder, 2-8

reconfigurable I/O, 2-1
RIO.

See

reconfigurable I/O

signal connections, 3-1
software (NI resources), A-1
software programming choices

NI Vision Builder for Automated

Inspection, 1-2

NI Vision Development Module, 1-2

start conditions, 1-4

technical support, A-1
training and certification (NI resources), A-1
transmission line effects, 2-16
trigger change detectors, 2-8
trigger inputs, 2-5
troubleshooting (NI resources), A-1
TTL inputs, 2-2
TTL outputs, 2-2

Summary of Contents for NI PCIe-8255R














































Search results

Summary of Contents for NI PCIe-8255R

Reviews:

Related manuals for NI PCIe-8255R

Brands by name

Popular brands

National Instruments NI PCIe-8255R, User Manual

Search results

Summary of Contents for NI PCIe-8255R

Reviews:

Related manuals for NI PCIe-8255R

Brands by name

Popular brands