background image

Getting Started with the NI PCI-1424

6

ni.com

Clocks

Pixel clock frequency range...................................20 KHz to 50 MHz

PCI Interface

Theoretical max PCI bandwidth ............................133 MB/s

Serial Interface

Signaling standard..................................................RS-232

Baud rates supported..............................................300, 600, 1200, 1800, 2000, 2400, 3600, 4800, 7200, 

or 9600 bps; 19.2, 38.4, or 56 kbps

Data bits .................................................................5, 6, 7, or 8 bits

Parity ......................................................................Odd, even, or disabled

Stop bit ...................................................................Enabled or disabled

Data transmit ready polarity ..................................Active high or active low

Ready-to-send polarity...........................................Active high or active low

Power Requirements

Voltage ...................................................................+ 5 V (2.135 A)

+12 V (250 mA)
–12 V (100 mA)

Physical

Dimensions ............................................................106.68 cm

×

312 cm (4.2 in.

×

12.283 in.)

Weight ....................................................................1.1 kg (0.5 lb)

Environment

The NI 1424 device is intended for indoor use only.

Operating temperature ...........................................0 °C to 55 °C

Storage temperature ...............................................–20 °C to 70 °C

Relative humidity...................................................5% to 90%, noncondensing

Pollution Degree ....................................................2

Approved at altitudes up to 2,000 m.

Safety

This product is designed to meet the requirements of the following standards of safety for electrical 
equipment for measurement, control, and laboratory use:

IEC 61010-1, EN-61010-1

UL 61010-1, CSA 61010-1

Note

For UL and other safety certifications, refer to the product label or visit 

ni.com/

certification

, search by model number or product line, and click the appropriate link

in the Certification column.

ReadOnly-0-Rev-2-GS_NI_1424.fm  Page 6  Thursday, January 4, 2007  2:32 PM

Summary of Contents for NI PCI-1424









Reviews: