©
National Instruments Corporation
11
NI Switches Getting Started Guide
Procedure 1: Installing the SCXI Switch in an Existing System
If your SCXI system already has a controller established and the controller
supports your switch, you can simply add additional SCXI switch modules
in any available SCXI slots. Refer to Table 2 to determine if your controller
supports your SCXI switch module.
1.
Power off and unplug the SCXI chassis. Follow proper ESD
precautions to ensure you are grounded before installing the hardware.
2.
Remove the filler panel in an unused SCXI slot.
3.
Touch any metal part of your chassis to discharge static electricity.
4.
Insert the switch module into the SCXI slot.
5.
Screw the device front panel to the chassis front panel mounting rail.
Figure 4.
Installing an SCXI Switch Module in an Existing System
1
Any New NI SCXI Switch Module
2
Existing SCXI Module
3
Any SCXI Chassis
4
Existing Controller
O
N
8
1
2
3
4
5
6
7
12
9
10
11
ADDRESS
BAUD
1
3
2
4
