1.
Prepare the surface for mounting the cRIO-9065 using the
2.
Align the cRIO-9065 on the surface.
3.
Fasten the cRIO-9065 to the surface using the M4 or number 8 screws appropriate for the
surface. Tighten the screws to a maximum torque of 1.3 N · m (11.5 lb · in.).
Surface Mounting Dimensions
The following figure shows the surface mounting dimensions for the cRIO-9065.
Figure 12. cRIO-9065 Surface Mounting Dimensions
4.1 mm
(0.16 in.)
47.0 mm
(1.85 in.)
47.2 mm
(1.86 in.)
30.6 mm
(1.20 in.)
41.1 mm
(1.62 in.)
Mounting the Device on a Panel
You can use the NI panel mounting kit to mount the cRIO-9065 on a panel.
NI cRIO-9065 User Manual
|
© National Instruments
|
19
