Integrated Voltage Input Monitor
The integrated voltage input monitor underreports the voltage at the power connector by up to
400 mV because of voltage drops across internal circuits.
Power Requirements
Recommended power supply
55 W secondary, 35 VDC maximum
Power consumption
cRIO-9022 only
17 W
cRIO-9022 supplying power to eight
C Series modules
35 W
Voltage requirement
On powerup
9 V to 35 V
After powerup
6 V to 35 V
Note
The cRIO-9022 is guaranteed to power up when 9 V is applied to V and C.
After powerup, it can operate on as little as 6 V.
Physical Characteristics
If you need to clean the controller, wipe it with a dry towel.
Screw-terminal wiring
Gauge
0.33 mm
2
to 2.1 mm
2
(22 AWG to 14 AWG)
copper conductor wire
Wire strip length
6 mm (0.24 in.) of insulation stripped from the
end
Temperature rating
85 °C
Torque for screw terminals
0.2 N · m to 0.25 N · m (1.8 lb · in. to
2.2 lb · in.)
Wires per screw terminal
One wire per screw terminal
Connector securement
Securement type
Screw flanges provided
Torque for screw flanges
0.3 N · m to 0.4 N · m (2.7 lb · in. to
3.5 lb · in.)
Weight
609 g (21.5 oz)
NI cRIO-9022 User Manual and Specifications
|
© National Instruments
|
15
Summary of Contents for NI cRIO-9022
Page 1: ...cRIO 9022...
