Internal Real-Time Clock
The cRIO-9022 system clock synchronizes with the internal high-precision real-time clock
during startup. This synchronization provides timestamp data to the cRIO-9022. You can use
the internal real-time clock to correct drift of the system clock.
Related Information
on page 14
USB Mass-Storage Devices
The cRIO-9022 supports common USB mass-storage devices such as USB Flash drives and
USB-to-IDE adapters formatted with FAT16 and FAT32 file systems. LabVIEW maps USB
devices to the
U:
,
V:
,
W:
, or
X:
drive, starting with the
U:
drive if it is available. You can
connect multiple USB mass-storage devices to the cRIO-9022 if you use a USB hub. Refer to
the
LabVIEW Help
for more information.
Note
If the cRIO-9022 is not in a hazardous location, you can connect and
disconnect USB devices without affecting operation.
DIP Switches
cRIO-9022 DIP switches are in the OFF position by default.
Figure 7.
Controller DIP Switches
SAFE MODE
CONSOLE OUT
IP RESET
NO APP
USER1
OFF
ON
SAFE MODE Switch
The following table describes the ON and OFF states of the SAFE MODE switch.
NI cRIO-9022 User Manual and Specifications
|
© National Instruments
|
9
Summary of Contents for NI cRIO-9022
Page 1: ...cRIO 9022...
