NI 9882 Operating Instructions
16
ni.com
circuits. Such voltage measurements include signal levels, special
equipment, limited-energy parts of equipment, circuits powered by
regulated low-voltage sources, and electronics.
Caution
Do not connect to signals or use for
measurements within Measurement Categories II, III,
or IV.
Isolation Voltages
Port-to-earth ground
Withstand.................................... 1000 V
rms
, verified by a 5 s
dielectric withstand test
Continuous ................................. 60 VDC,
Measurement Category I
Safety Standards
This product meets the requirements of the following standards
of safety for electrical equipment for measurement, control, and
laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
