26
|
ni.com
|
NI 9512 Operating Instructions and Specifications
Axis Fault
The Axis Fault LED (red) has two states to indicate the presence of
a fault in the system. Refer to the S
oftMotion Module
book of the
LabVIEW Help
for a list of module faults and troubleshooting
information.
•
Off
—No module faults.
•
Lit
—One or more module faults.
Sleep Mode
This module supports a low-power sleep mode. Support for sleep
mode at the system level depends on the chassis that the module is
plugged into. Refer to the chassis manual for information about
support for sleep mode. If the chassis supports sleep mode, refer to
the software help for information about enabling sleep mode. Visit
ni.com/info
and enter
cseriesdoc
for information about
C Series documentation.
Typically, when a system is in sleep mode, you cannot
communicate with the modules. In sleep mode, the system
consumes minimal power and may dissipate less heat than it does
in normal mode. Refer to the
section for more
information about power consumption and thermal dissipation.
