Routing the NI 9469
The NI 9469 features a configurable crosspoint switch. You can
control the routing of signals and the onboard clock generator
between each front port and the trigger lines in the backplane.
However, the crosspoint switch is not a full routing matrix. You
can connect only the same Line or Trig number. For example,
Line 0 to Trig 0, but not Line 0 to Trig 2. However, you can route
clock signals on only Line 3 or Trig 3. The following figure
details the crosspoint switch's routing capabilities.
Note
You can set only eight of the 12 total port lines
as outputs due to power constraints.
8
|
ni.com
|
NI 9469 Getting Started Guide