background image

Caution

 Ensure that hazardous voltage wiring is performed only by

qualified personnel adhering to local electrical standards.

Attention

 S'assurer que le câblage à tension dangereuse est effectué par

du personnel qualifié respectant les normes électriques locales.

Caution

 Do not mix hazardous voltage circuits and human-accessible

circuits on the same product.

Attention

 Ne pas combiner des circuits avec des tensions dangereuses et

des circuits accessibles aux personnes sur le même produit.

Caution

 When product terminals are hazardous voltage LIVE, you must

ensure that devices and circuits connected to the product are properly

insulated from human contact.

Attention

 Lorsqu'une haute tension dangereuse est appliquée aux

bornes du produit, vous devez vous assurer que les appareils et les circuits

auxquels il est connecté sont correctement isolés de tout contact humain.

Caution

 You must use the connector backshell kit to ensure that the

terminals are not accessible.

Safety Guidelines for Hazardous Locations

The NI-9220 is suitable for use in hazardous locations; , and hazardous locations;

and nonhazardous locations only. Follow these guidelines if you are installing the

NI-9220 in a potentially explosive environment. Not following these guidelines may

result in serious injury or death.

ni.com

4

NI-9220 Getting Started

Summary of Contents for NI 9220











Reviews: