background image

Overview

This document explains how to connect to the NI-9220.

Note

 Before you begin, read the NI-9220 Safety, Environmental, and

Regulatory Information document on 

ni.com/manuals

 and complete the

software and hardware installation procedures in your chassis

documentation.

Note

 The guidelines in this document are specific to the NI-9220. The

other components in the system might not meet the same safety ratings.

Refer to the documentation for each component in the system to

determine the safety and EMC ratings for the entire system.

Safety Guidelines

Caution

 Observe all instructions and cautions in the user documentation.

Using the product in a manner not specified can damage the product and

compromise the built-in safety protection.

Attention

 Suivez toutes les instructions et respectez toutes les mises

en garde de la documentation d'utilisation. L'utilisation du produit de

toute autre façon que celle spécifiée risque de l'endommager et de

compromettre la protection de sécurité intégrée.

Safety Guidelines for Hazardous Voltages

If hazardous voltages are connected to the product, take the following precautions.

A hazardous voltage is a voltage greater than:

 30 V RMS, 42.4 V peak, or 60 V DC in DRY LOCATIONS

 16 V RMS, 22.6 V peak, or 35 V DC in WET LOCATIONS

© National Instruments

3

NI-9220 Getting Started

Summary of Contents for NI 9220











Reviews: