2
|
ni.com
|
NI 9219 Calibration Procedure
Software
Calibrating the NI 9219 requires the installation of NI-DAQmx 9.3 or later on the calibration
system. You can download NI-DAQmx from
ni.com/downloads
. NI-DAQmx supports
LabVIEW, LabWindows/CVI, C/C++, C#, and Visual Basic .NET. When you install
NI-DAQmx you only need to install support for the application software that you intend to use.
Documentation
Consult the following documents for information about the NI 9219, NI-DAQmx, and your
application software. All documents are available on
ni.com
and help files install with the
software.
Test Equipment
Table 1 lists the equipment recommended for the performance verification and adjustment
procedures. If the recommended equipment is not available, select a substitute using the
requirements listed in Table 1.
NI cDAQ-9174/9178 USB Chassis Quick Start
NI-DAQmx installation and hardware setup
NI
9219 Operating Instructions and Specifications
NI 9219 specific information, specifications, and calibration interval
NI-DAQmx Readme
Operating system and application software support in NI-DAQmx
LabVIEW Help
LabVIEW programming concepts and reference information about NI-DAQmx VIs and
functions
NI-DAQmx C Reference Help
Reference information for NI-DAQmx C functions and NI-DAQmx C properties
NI-DAQmx .NET Help Support for Visual Studio
Reference information for NI-DAQmx .NET methods and NI-DAQmx .NET properties, key
concepts, and a C enum to .NET enum mapping table