National Instruments NI 9214 Operating Instructions And Specifications Download Page 44 | Manualshive

Page: 44 / 44

National Instruments NI 9214 Operating Instructions And Specifications Download Page 44

© 2010 National Instruments Corp. All rights reserved.

375138A-01

Oct10

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are
trademarks of National Instruments Corporation. Refer to the

Trademark Information

at

ni.com/trademark

s

for other National Instruments trademarks. Other product and company names mentioned herein are trademarks or
trade names of their respective companies. For patents covering National Instruments products/technology, refer to
the appropriate location:

Help»Patents

in your software, the

patent

s

.txt

file on your media, or the

National

Instruments Patent Notice

at

ni.com/patent

s

.

Korea 82 02 3451 3400, Lebanon 961 (0) 1 33 28 28,
Malaysia 1800 887710, Mexico 01 800 010 0793,
Netherlands 31 (0) 348 433 466, New Zealand 0800 553 322,
Norway 47 (0) 66 90 76 60, Poland 48 22 328 90 10,
Port

u

gal 351 210 311 210, R

u

ssia 7 495 783 6851,

Singapore 1800 226 5886, Slovenia 386 3 425 42 00,
So

u

th Africa 27 0 11 805 8197, Spain 34 91 640 0085,

Sweden 46 (0) 8 587 895 00, Switzerland 41 56 2005151,
Taiwan 886 02 2377 2222, Thailand 662 278 6777,
T

u

rkey 90 212 279 3031, United Kingdom 44 (0) 1635 523545

NI_9214.fm Page 44 Monday, November 1, 2010 9:52 AM

«
...
42
43
44

Summary of Contents for NI 9214













































Reviews:

No comments