manualshive.com logo in svg

National Instruments NI 9211E, Operating Instructions And Specifications

Share
Download
National Instruments NI 9211E Operating Instructions And Specifications Download Page 24

© 

National Instruments Corp.

23

NI 9211E Operating Instructions and Specifications

Torque for screw terminals ............... 0.5 to 0.6 N · m 

(4.4 to 5.3 lb · in.)

Ferrules ............................................. 0.25 mm

2

 to 2.5 mm

2

Weight............................................... 63 g (2.2 oz)

Safety

Safety Voltages

Connect only voltages that are within the following limits.

Channel-to-COM

..............................±

30 V max

Isolation

Channel-to-channel .................... None
Channel-to-earth ground

Continuous ........................... 250 V

rms

,

Measurement Category II,
(Double insulation)

Withstand ............................. 2,300 V

rms

, verified by a 5 s 

dielectric withstand test 

Measurement Category II is for measurements performed on 
circuits directly connected to the electrical distribution system. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for NI 9211E
































Reviews:

No comments

Brands by name

Popular brands

Load more brands