![background image](http://html1.mh-extra.com/html/national-instruments/ni-9205/ni-9205_operating-instructions-manual_709220009.webp)
©
National Instruments Corp.
9
NI 9205 Operating Instructions and Specifications
Figure 3.
Input Circuitry for One Analog Channel on the NI 9205
Connecting Wires to the NI 9205 Spring-Terminal
Connector
Use a flathead screwdriver with a blade smaller than 2.3 × 1.0 mm
(0.09 × 0.04 in.) to connect wires to the detachable spring-terminal
connector. Insert the screwdriver into a spring clamp activation slot
and press a wire into the corresponding connector terminal, then
remove the screwdriver to clamp the wire into the terminal.
Refer to the
section for more information abo
u
t
spring-terminal wiring. Refer to Fig
u
re 4 for an ill
u
stration of
connecting wires to the NI 9205 with spring terminal.
AI+
AI–
COM
ADC
MUX
PGIA
AI
S
EN
S
E
NI 9205
Trigger Trig
Filtered
Differential
Amplifier
16-bit
Isolated
ADC