National Instruments NI 9159, User Manual And Specifications

Page: 15 / 20

Reconfigurable FPGA
NI 9157
FPGA type Virtex-5 LX85
Number of flip-flops 51,840
Number of 6-input LUTs 51,840
Number of DSP48 slices
(25 x 18 multipliers) 48
Embedded block RAM 3,456 kbits
NI 9159
FPGA type Virtex-5 LX110
Number of flip-flops 69,120
Number of 6-input LUTs 69,120
Number of DSP48 slices
(25 x 18 multipliers) 64
Embedded block RAM 4,608 kbits
Timebases 40 MHz, 80 MHz, 120 MHz, 160 MHz, or 200
MHz
Accuracy ±100 ppm (maximum)
Frequency dependent on jitter (peak-to-peak)
40 MHz 250 ps
80 MHz 422 ps
120 MHz 422 ps
160 MHz 402 ps
200 MHz 402 ps
Power Requirements
Caution You must use the NI 9157/9159 with a 9 VDC to 30 VDC output, UL
Listed limited power source (LPS) supply. The power supply must bear the UL
Listed and LPS marks. The power supply must also meet any safety and compliance
requirements for the country of use.
Recommended power supply 55 W, 30 VDC maximum
Voltage requirement 9 V to 30 V
NI 9157/9159 User Manual and Specifications | © National Instruments | 15