Chapter 2
Installation and Configuration
©
National Instruments Corporation
2-17
Power Management Setup
ACPI Function
This option activates the Advanced Configuration and Power Management
Interface (ACPI) function. If your operating system is ACPI aware, such as
Windows 2000/XP/Me/98SE, select Enabled.
Wake Up by PCI Card, Power on by Ring, Wake Up
on LAN
These options specify whether the system is awakened from power saving
modes when it detects activity or an input signal from the specified
hardware.
Resume by Alarm
This option enables or disables booting the system on a scheduled time
and date.
Date (of Month) Alarm
This option specifies the date for Resume by Alarm. The range is 0–31.
Time (hh:mm:ss) Alarm
The option specifies the time for Resume by Alarm. The format is
<hour><minute><second>.
Note
If you change this setting, the system must reboot and enter the operating system for
Resume by Alarm to work.
Frequency/Voltage Control
Use this menu to specify frequency/voltage control settings.
Auto Detect PCI Clk
Use this option to auto detect the PCI slots. When set to Enabled, the
system removes (turns off) clocks from empty PCI slots to minimize
electromagnetic interference (EMI).
