National Instruments NI-5752B, Getting Started Manual

Page: 5 / 17

Table 1. FlexRIO Documentation Locations and Descriptions (Continued)
Document Location Description
IPNet Located at ni.com/ipnet . Contains LabVIEW FPGA
functions and intellectual property
to share.
FlexRIO product page Located at ni.com/flexrio . Contains product information and
data sheets for FlexRIO devices.
Verifying the System Requirements
To use the NI 5752/5752B, your system must meet certain requirements. For more information
about minimum system requirements, recommended system, and supported application
development environments (ADEs), refer to the readme, which is available on the software
media or online at ni.com/updates .
Compatibility with FPGA Modules and
Controllers for FlexRIO
The NI 5752B variant is compatible with all FlexRIO FPGA modules and controllers for
FlexRIO; however, the NI 5752 variant is only compatible with NI PXI-795xR and
NI PXIe-796xR modules. The following table lists each adapter module's compatibility with
FlexRIO FPGA modules and controllers for FlexRIO.
Table 2. Adapter Module Compatibility
NI PXI-795xR NI PXIe-796xR NI PXIe-797xR NI-793xR
NI 5752 Yes Yes No No
NI 5752B Yes Yes Yes Yes
Accessories
NI SMB-2147/2148 devices are shielded signal accessories for NI 5752/5752B adapter
modules. NI SMB-2147/2148 accessories provide easy connections to other devices for testing
and debugging. For more information about these accessories, refer to the
NI SMB-2145/2146/2147/2148 User Guide
. The following figure shows a typical setup of the
NI 5752/5752B with the NI SMB-2147 and NI SMB-2148 signal accessories.
4 | ni.com | NI 5752/5752B Getting Started Guide