LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle
logo are trademarks of National Instruments Corporation. Refer to the
Trademark Information
at
ni.com/trademarks
for other National Instruments trademarks. Other product and company
names mentioned herein are trademarks or trade names of their respective companies. For patents
covering National Instruments products/technology, refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on your media, or the
National Instruments Patent Notice
at
ni.com/patents
. Refer to the
Export Compliance Information
at
ni.com/legal/
export-compliance
for the National Instruments global trade compliance policy.
© 2011 National Instruments Corporation. All rights reserved.
375
653
A-01
Feb11
Attaching an HDMI Cable Ferrite
Complete the following instructions to attach the snap-on cable ferrite included with your kit to your
HDMI cable. Install the ferrite at the end of the HDMI cable nearest to the AUX I./O connector.
1.
Open the ferrite by unsnapping the clasp.
2.
Place the HDMI cable inside the ferrite.
3.
Close the ferrite around the cable until it snaps into place.