background image

©

 National Instruments Corporation

17

Getting Started with the NI 17xx Smart Camera

24 V external strobe

Polarity...........................................................Active high

Strobe frequency ............................................Operating frame rate

ON state

Voltage ...................................................Unregulated output drawn from the smart camera 

power supply

Current ...................................................16 mA, maximum

OFF state

Voltage ...................................................Not driven

Current ...................................................Not applicable

Network

Network interface...................................................Ethernet

Ports .......................................................................2

Speed......................................................................10; 100; 1,000 Mbps

Duplex....................................................................Full, half

Speed autodetection ...............................................Yes

Duplex autodetection .............................................Yes

Auto MDI/MDI-X correction ................................Yes

DHCP Support .......................................................Port 1 only

Serial

Baud rates ..............................................................Up to 230.4 Kbps

Default baud rate............................................9,600 bps

Hardware flow control ...........................................No

Optically Isolated Inputs and Outputs

Isolated Inputs

Channels.................................................................2

Input type ...............................................................Sinking/sourcing, both inputs must have the same 

configuration

Digital logic levels

OFF state

Input current...........................................0 mA to 0.1 mA

Input voltage ..........................................0 V to 1 V

ON state

Input current...........................................3 mA to 5.4 mA

Input voltage ..........................................20 V to 30 V

Minimum pulse width ............................................1 ms

Summary of Contents for NI 17 xx





















Reviews: