National Instruments MXIbus VME-AT2000 Getting Started Download

Page: 75 / 77

Glossary

VME-AT2000/NI-VXI MS-DOS Getting Started

Glossary-6

© National Instruments Corporation

MODID

Module Identification lines

movs

Move string command

MTBF

Mean Time Between Failure

MXIbus

Multisystem eXtension Interface Bus; a high-performance communication
link that interconnects devices using round, flexible cables.

MXIbus System

A functional module that has arbiter, daisy-chain driver, and MXIbus

Controller

cycle timeout responsibility. Always the first device in the MXIbus
daisy-chain.

NI-VXI

The National Instruments bus interface software for VME/VXIbus
systems.

PC AT

Personal Computer Advanced Technology

propagation

The transmission of signal through a computer system.

A Servant-only device that supports VXIbus configuration registers.

device

RESMAN

The name of the National Instruments Resource Manager in NI-VXI bus
interface software. See Resource Manager.

Resource Manager

A Message-Based Commander located at Logical Address 0, which
provides configuration management services such as address map
configuration, Commander and Servant mappings, and self-test and
diagnostic management.

See Resource Manager.

seconds

Servant

A device controlled by a Commander; there are Message-Based and
Register-Based Servants.

Summary of Contents for MXIbus VME-AT2000














































































Search results

Summary of Contents for MXIbus VME-AT2000

Reviews:

Related manuals for MXIbus VME-AT2000

Brands by name

Popular brands

National Instruments MXIbus VME-AT2000, Getting Started

Search results

Summary of Contents for MXIbus VME-AT2000

Reviews:

Related manuals for MXIbus VME-AT2000

Brands by name

Popular brands