Set Up Your MXI-Express x4 System
6
ni.com
9.
Replace the computer cover.
10. Plug the computer back in.
Figure 1.
Installing the NI PCIe-8371/8372
Installing the Low-Profile Bracket on the NI PCIe-8371 (Optional)
To install the NI PCIe-8371 in a host computer that requires a low-profile
height card, the front bracket must be replaced with the low-profile bracket
included with your kit. Complete the following steps to replace the bracket.
1.
Remove the standard height front bracket already installed on your
NI PCIe-8371 card by removing the two 4-40 × 1/4 inch Phillips head
screws that attach the bracket to the card. Note that the two mounting
tabs for the standard height bracket rest against the
front
side of the
card, which is the side upon which the cable receptacle connector
housing rests. Set the two screws aside to re-use when installing the
low-profile bracket.
1
NI PCIe-8371/8372
2
PCI Express x4 Card-Edge Connector
3
PCI Express Slot (x4 or wider)
1
3
2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com