background image

Chapter 2

Hardware Installation

Fiber-Optic MXI-Express x4 for PXI Express User Manual

2-6

ni.com

Notes

The cables are shipped with a protective plastic cap which must be removed before 

connecting the cable to the Fiber-Optic MXI-Express x4 hardware. The protective cap 
should be used when the cable is stored.

For more information about cables, refer to the 

Cable Options

 section of Chapter 3, 

Hardware Overview

.

If daisy chaining additional chassis, connect PORT 2 of the NI PXIe-8375 closer to the 
system controller to PORT 1 of the NI PXIe-8375 of the daisy chained chassis.

Connect the Fiber-Optic MXI-Express x4 cable to the NI PCIe-8375 and to 
PORT 1 of the NI PXIe-8375. The cables have no polarity, so either end 
may be connected to either card.

Powering Up the Fiber-Optic MXI-Express x4 System

1.

Power-on all of the expansion chassis in any order you choose.

2.

Power-on the host.

Standard PCI-PCI bridges and switches are used to add PCI devices to a 
PCI hierarchy in which all the bridges and devices are contained within a 
single chassis. Because of this, BIOSes and operating systems make the 
assumption that all PCI devices in the entire hierarchy will be available as 
soon as code execution begins at power-up. This assumption means that all 
of the expansion chassis must be turned on before the host PC for the BIOS 
and OS to correctly configure a Fiber-Optic MXI-Express x4 system.

Note

There are no requirements on how Fiber-Optic MXI-Express x4 expansion chassis 

are powered up relative to each other, as long as they are all on before the computer is 
powered on.

Powering Down the Fiber-Optic MXI-Express x4 System

Because operating systems and drivers commonly make the assumption 
that PCI devices will be present in the system from power-up to 
power-down, it is important not to power off the expansion chassis until 
after the host PC is powered off. Powering off the expansion chassis while 
the host is still on can cause crashes or hangs.

After the host computer has powered down, the order in which expansion 
chassis are powered off relative to each other is not important. However, to 
power down a chassis that still has its upstream link active, the power 
button must be pressed for at least 4 seconds.

Summary of Contents for MXI-Express x4 Series









































Reviews: