Attention
Avant d'ouvrir le MON-10496 pour l'entretien, vous devez couper
l'alimentation externe de l'appareil et utiliser le boîtier de disjoncteur externe pour
supprimer complètement l'alimentation secteur.
Caution
All wiring must be insulated for the highest voltage used.
Attention
Tout le câblage doit être isolé pour la plus haute tension utilisée.
Caution
Conduit or gland fittings must be installed by trained personnel according
to applicable electrical standards and the torque specified by the manufacturer.
Attention
Les raccords de conduits ou presse-étoupe doivent être installés par du
personnel qualifié conformément aux normes électriques applicables et au couple
spécifié par le fabricant.
Caution
Ensure that hazardous voltage wiring is performed only by qualified
personnel adhering to local electrical standards.
Attention
Les raccords de conduits ou presse-étoupe doivent être installés par du
personnel qualifié conformément aux normes électriques applicables et au couple
spécifié par le fabricant.
EMC Notices
Refer to the following notices for cables, accessories, and prevention measures necessary to
ensure the specified EMC performance.
Notice
For EMC declarations and certifications, and additional information, refer
to the
Product Certifications and Declarations
Notice
Changes or modifications to the product not expressly approved by NI
could void your authority to operate the product under your local regulatory rules.
MON-10496 User Guide
|
© National Instruments
|
5