![background image](http://html.mh-extra.com/html/national-instruments/m-series/m-series_user-manual_709606257.webp)
B-32
|
ni.com
Appendix B
Timing Diagrams
Figure B-41.
Counter/Timer Circuitry
Pin to Internal Signal Delays
Input timing is the timing specification for importing a signal to an internal bus on the M Series
device. Table B-26 shows the input timing for the counters on all input terminals. Signals refer
to the signal at the I/O connector of the device, and signals appended with _i refer to the signal
internal to the device after the input buffer.
Figure B-42.
Pin to Internal Signal Delays Timing Diagram
Table B-26.
Pin to Internal Signal Delays Timing
Time
From
To
Min (ns)
Max (ns)
t
1
*
PFI
PFI_i
5.2
6.2
18.2
22.0
RTSI
RTSI_i
2.0
2.5
5.0
6.0
STAR
STAR_i
0.9
—
—
2.5
*
The delay ranges given for PFI and RTSI represent the fastest and slowest terminal routing within the
trigger group for a given condition (maximum or minimum timing). This difference can be useful when
two external signals will be used together and the relative timing between the signals is important.
32-Bit
Counter
Gate
Logic
PFI, RTSI,
or PXI_STAR
(Counter n Source)
PFI, RTSI,
or PXI_STAR
(Counter n Gate)
PFI, RTSI,
or PXI_STAR
(Counter n
Internal Output)
Count_Enable
Other Internal
Signals
PFI_i, RTSI_i,
or PXI_STAR_i
Selected_Gate
Selected_Source
Out_o
PFI, RTSI,
or PXI_STAR
80 MHz Timebase
20 MHz Timebase
100 kHz Timebase
PXICLK10
t
1
t
1
PFI, RTSI,
or PXI_STAR
PFI_i, RTSI_i,
or PXI_STAR_i
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com