Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and
prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved
by National Instruments could void your authority to operate it under your local
regulatory rules.
Electromagnetic Compatibility
CE Compliance
This product meets the essential requirements of applicable European Directives, as
follows:
■
2014/35/EU; Low-Voltage Directive (safety)
■
2014/30/EU; Electromagnetic Compatibility Directive (EMC)
■
2011/65/EU; Restriction of Hazardous Substances (RoHS)
■
2014/53/EU; Radio Equipment Directive (RED)
■
2014/34/EU; Potentially Explosive Atmospheres (ATEX)
Product Certifications and Declarations
Refer to the product Declaration of Conformity (DoC) for additional regulatory
compliance information. To obtain product certifications and the DoC for NI
ni.com
4
IVN-8561 Getting Started
