National Instruments ISO5851, User Manual

Page: 3 / 16

TB2
PSU
V
CC2
V
E
E
2
G
N
D
2
V
C
C
2
TB2
PSU
V
CC2
V
EE
2
G
N
D
2
V
C
C
2
V
EE2
www.ti.com
EVM Setup and Precautions
2 EVM Setup and Precautions
2.1 Power Supply Connections
Figure 1 illustrates the EVM power supply schematic.
Figure 1. ISO5851 EVM Power Supply Schematic
The primary side of the EVM (V
CC1
) operates from a single 3-V to 5.5-V power supply and connected via
TB3. Test point (TP8) is available for monitoring the primary power supply.
The EVM provides connections for evaluating the output side (V
CC2
, V
EE2
) with either a bipolar or unipolar
power supply, from a minimum 15-V to maximum 30-V. For unipolar operation, connect V
EE2
to GND2
through a wire-bridge between pin 2 and pin 3 of TB2, as shown in Figure 2 . V
CC2
and V
EE2
can be
monitored via TP17 and TP19, respectively.
Figure 2. Output Power Supply for Unipolar (Left) or Bipolar (Right) Operation
3 SLLU218 – June 2015 ISO5851 Evaluation Module
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated