Figure 3. DIO/Passthrough Mode Switch Setting
Temperature
Sensor
DAQ Device
SH100-100-F Cable
SCB-100
Screw
Terminal
100
99
1
100
99
1
2
2
NC
NC
NC
LED
S6 S5 S4
S1
S2
S3
Refer to your device documentation for device signal information.
Using the SCB-100 with MIO Devices
You can take measurements with the SCB-100 and MIO DAQ devices, such as E Series, in a
number of ways. The SCB-100 has a temperature sensor for cold-junction compensation to
accommodate thermocouples. Switches S4, S5, and S6 configure the temperature sensor for
different analog input settings. The following table shows the different switch settings for
MIO DAQ devices.
6
|
ni.com
|
NI SCB-100 Installation Guide and Specifications
