CD/DVD ROM Drive BBS Priorities Submenu
•
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot
priority of CD/DVD ROM drive devices. The highest priority device is displayed on the
main
Boot Option Priorities
list. Optionally, each device can also be
Disabled
if the
device should never be used as a boot device.
Floppy Drive BBS Priorities Submenu
•
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot
priority of network devices. The highest priority device is displayed on the main
Boot
Option Priorities
list. Optionally, each device can also be
Disabled
if the device should
never be used as a boot device.
Network Device BBS Priorities Submenu
•
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify the boot
priority of network devices. The highest priority device is displayed on the main
Boot
Option Priorities
list. Optionally, each device can also be
Disabled
if the device should
never be used as a boot device.
Save & Exit Menu
The Save & Exit setup menu includes all available options for exiting, saving, and loading the
BIOS default configuration. You can also press <F9> to load BIOS default settings and <F10>
to save changes and exit setup.
The Save & Exit setup menu includes the following settings:
•
Save Changes and Reset—Any changes made to BIOS settings are stored in NVRAM.
The setup utility then exits and reboots the controller.
•
Discard Changes and Reset—Any changes made to BIOS settings during this session of
the BIOS setup utility since the last save are discarded. The setup utility then exits and
reboots the controller. The <Esc> key can also be used to select this option.
•
Save Changes—Changes made to BIOS settings during this session are committed to
NVRAM. The setup utility remains active, allowing further changes.
•
Discard Changes—Any changes made to BIOS settings during this session of the BIOS
setup utility since the last save are discarded. The BIOS setup continues to be active.
•
Restore Factory Defaults—This option restores all BIOS settings to the factory default.
This option is useful if the controller exhibits unpredictable behavior due to an incorrect
or inappropriate BIOS setting. Any nondefault settings are also restored to their factory
defaults. The <F9> key can also be used to select this option.
•
Save as User Defaults—This option saves a copy of the current BIOS settings as the User
Defaults. This option is useful for preserving custom BIOS setup configurations.
•
Boot Override—This option lists all possible bootable devices and allows the user to
override the
Boot Option Priorities
list for the current boot. If no changes have been
made to the BIOS setup options, the system will continue booting to the selected device
without first rebooting. If BIOS setup options have been changed and saved, a reboot is
required and the boot override selection will not be valid.
24
|
ni.com
|
IC-3120 User Manual
